MBClub UK Bringing together Mercedes Enthusiasts View Single…

9 Июн 2015 | Author: | No comments yet »

Originally Posted by R2D2

An ebay advert for Item No.

In case it vanishes it says:

to replace your broken or in case you want to tune engine (see below)!

installation of the rare supercharger comes to cars powered M271 Evo (W203 C230 192 hp)

Sale of the supercharger Eaton M45 fitted to specific vehicles Mercedes-Benz series W211, W209, W204, R171 with 1.8l engine M271!

The supercharger is new and never on a car!

It has been tested on a with a special machine to that it works as should and is to be fitted without any hesitation!

Mercedes-Benz equips its vehicles the M271 engine with turbochargers, which either in the mechanism (trident or spring) by the supercharger or the pulley size or small)!

This particular is Part Number A2710902780, is driven by spring and comes in motor M271 Evo (the W203 C230 Kompressor 192 hp) One of the main reasons for the difference in compared to the other M271 and 163 horses) as they are fitted in such the W203 series C180 Kompressor and C200 is the size of the supercharger pulley is smaller, the pulley is in all other in size (internal diameter)

while in A 271 090 27 80 size (internal is 65mm thus raises on the same engine speed!

a very good and proven to increase horsepower!

In a CLK200 W209 MY2005 with 163 it has been observed an increase in hp by changing the stock supercharger (A 271 090 20 80) in 186 and it was on dyno before with 170 hp! were at about 16 hp!

In general you expect an increase of 15 to 20 hp!

Another thing is the operation of the supercharger is clearly quieter than ofsuperchargers with a trident!

Changing your supercharger A2710902080, A2710902380 A2710902680, and the pulley) with A2710902780 is the upgrade you can make to your and always stay within the specifications!

Please note the supercharger pulley is not an aftermarket as these that occasionally on eBay!

The pulley is pressed on the and it is stock just like factory just like the one you buy a Mercedes Benz Dealer!

is changed, it is 100% new and stock!

supercharger for vehicles of Mercedes-Benz engine

Part Number:

Pulley Diameter: 65mm

Supercharger is new and unused!

Has never installed on an engine!

It is tested for function!

It has some surface created during transport in no case affect its working

Ј750 for 15-20 bhp though.

dont know how i actually this one

This auction is and this week there was one installation on an SLK200 Kompressor MY2005 with 163hp!

know if its worth the upgrade for but what i really enjoy the is the by far more smooth performance it has to the 2080 i used to have Thats because 2780 has a for driving the pulley whereas is coupler driven!

In a few days i am going back to Greece and having a dyno! Had issues with the transmission the few months so didnt get in trouble for one!

What i would like to know is if there is in here that has the CK20 Carlsson Fitted!

A friend of did make the exact same Carlsson sells for a small we fitted them on a car and didnt see any difference!

I have also that they promise a in boost. how? Only know cause there is no somebody builds more without fooling the BOV! which i dont think managed to do till now.

Last edited by SchwarzesAMG; at 01:14 AM .

Eaton 2710902780 specs
A2710902780 spec

A2710902780 spec

interesting records

Related Posts::

Here you can write a commentary on the recording "MBClub UK Bringing together Mercedes Enthusiasts View Single…".

* Required fields
All the reviews are moderated.
Our partners
Follow us
Contact us
Our contacts


Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Mercedes-Benz catalog with specifications, pictures, ratings, reviews and discusssions about cars Mercedes-Benz.