2008 Carlsson CK50 | Conceptcarz com

15 Янв 2015 | Author: | No comments yet »
Mercedes-Benz Carlsson CK50 E 500 Coupe

2008 Carlsson CK50 pictures, specifications, and information

Carlsson CK50


* Carlsson based on the SL 500 wîth 435 HP/600 Nm

* Top 293 km/h, acceleration 0-100 in 5.1 seconds

* Intelligent electronic SÚSPENSION lowering gear

* forged metal wheels the 1/16 Últra Light

For the newly-arrived, comprehensively reworked SL, Carlsson Autotechnik GmbH in can already offer an individualisation transforming the SL 500 into the Carlsson

Coming on strong: the Carlsson engine kit Specially developed by for the current 5.5 Litre V8, the CK50 kit, which includes the of the electronic control unit, the elegant roadster to accelerate 0-100 km/h in 5.1 seconds. their boost by Carlsson, the and torque data are quite 435 HP/ 320 kW (standard model: 388 HP/ 285 kW) at 6000 The torque of the tuned V8 is 600 Nm/ 2800-4800 rpm regulated), the top speed is 293 km/h to the Vmax delimiter, wîth from 0-100 km/h in 5.1 seconds. In short, the CK50 kit has more than enough and torque for any situation! Support for its comes in the form of the CK50 exhaust gas system, which has individually adapted to optimise the of exhaust gases. The exhaust gas pressure is reduced wîth the of sports middle and rear silencers made of corrosion-resistant steel and developed by Carlssons own Four polished exhaust bear witness to the additional of this SL.

Naturally, Carlsson can also the appropriate performance enhancements for of the SL wîth other engines in extending right up to the CK65, has over 700 HP and a torque of 1100 Nm. In all performance enhancements, the Carlsson are constantly on the lookout to ensure the tolerance limits of the engine are not exceeded, so as to avoid any damage. all engines that have tuned by Carlsson still wîth all the regulations concerning fumes.

Aerodynamics, Carlsson style: appearance meets sporty

Good aerodynamics in a car will a positive effect on its driving and Discreet but highly-efficient Carlsson round off the appearance of this SL, adding a sporting touch. For wîth an AMG styling package, is offering a length-adjustable front lip, made of PÚR in original manufacturer quality or of carbon, is used as a material in motor Further visual highlights are by the grille inserts made of stainless steel for the air inlets, and by the air gill vents wîth supports. Also for vehicles AMG styling, Carlsson builds the rear apron a diffusor made of PÚR, wîth an air system made of carbon. For the rear apron wîth AMG Carlsson offers grille made of electropolished stainless A spoiler at the rear creates downward impetus, thus greater stability at high

The electronic C-Tronic SÚSPENSION gear

Carlsson also electronic C-Tronic SÚSPENSION gear for the SL, which lowers the approximately 30 mm further thus the roadster a visibly sportier and ensuring a lower centre of

Mercedes-Benz Carlsson CK50 E 500 Coupe

This C-Tronic SÚSPENSION intelligently to the actual road On a poor stretch of road, or in the of persistently heavy compression, the of the vehicle is automatically readjusted to that the necessary reserve of travel required for preserving comfort is maintained. Even at in excess of 120 km/h, the suspension remains sufficient at all times the C-Tronic SÚSPENSION respects the depth permissible for the standard in other words, the minimum level.

Reduced body roll and a greater agility in handling in turn to a significant increase in pleasure. At the same time, less air flowing beneath the there is a reduction in aerodynamic and lift.

The 1/16 Últra high tech forged

The surface of the 1/16 Últra multi-spoke wheel is polished to a finish and coated wîth protective lacquer. The sides of the are brush-finished and create an elegant to the surface.

Multi-spoke designs are for the optimisation of weight. The even of the spokes means that acting upon the wheel are into the wheel spider as as possible. Thus an oversized is avoided and the ideal wheel achieved. Stat-of-the-art forging ensures a saving in weight of 38% as opposed to cast wheels of wheel load and dimensions. Due to the of the metal, discharged forces are onward more evenly in a cast wheel. The unsprung at the wheel suspensions are kept as low as and as a result the wheels tramp This is why Carlssons forged guarantee a noticeable improvement in comfort over conventional metal wheels, and this can be particularly clearly on an uneven surface.

Carlssons forged Carlsson Últra Light wheel is for the SL in the following sizes: 8.5 x 19, 8.5 x 20 and 9.5 x 20 (VA+HA) and 10 x 19 and 11 x 20 (HA A typical 20 combination would of 9.5 x 20 at the front and 11 x 20 at the rear, wîth and 305/25 tyres respectively.

A chic interior ambience

Mercedes-Benz Carlsson CK50 E 500 Coupe
Mercedes-Benz Carlsson CK50 E 500 Coupe
Mercedes-Benz Carlsson CK50 E 500 Coupe
Mercedes-Benz Carlsson CK50 E 500 Coupe
Mercedes-Benz Carlsson CK50 E 500 Coupe

records

Here you can write a commentary on the recording "2008 Carlsson CK50 | Conceptcarz com".

Sign in, to write a review.

Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

423360519

About this site

For all questions about advertising, please contact listed on the site.


Mercedes-Benz catalog with specifications, pictures, ratings, reviews and discusssions about cars Mercedes-Benz.